LB PA 4200 DSC CINCH
'Endstufe mit 8 x 8 DSP , 19'', 1 HE, 4

LB PA 4200 DSC CINCH
'Endstufe mit 8 x 8 DSP , 19'', 1 HE, 4

EIA
3'207.00

Please log in to be able to use the shopping cart and then complete orders.

Log in
Available
19" multi-channel DSP power amplifier, 8x Line In Cinch. ; 4xOUT 200W
Item no 3106-0065
EAN code 4262421614433
Garantie 5 Jahre Garantie

Description

The PA 4200 is an audiophile Class D amplifier with 4 channels and two slots for different input modules. The three model variants are equipped with balanced line inputs, unbalanced cinch inputs or Dante module and can be expanded with a second input module. By combining two input modules, the power amplifier can be operated as an amplifier centre with mixed analogue and digital signal sources. Ground-lift switches per input channel pair and DIP switches for adjusting the input sensitivity per channel allow optimal adaptation to different signal sources.

The PA 4200's circuitry is designed for very high sound quality and operational reliability with minimal heat generation. The generously dimensioned power supply unit with high filter capacities and our newly developed processor-controlled Class D power amplifier modules ensure very high efficiency and enormous power reserves. The Auto-On/Off function (switchable per channel) automatically switches inactive amplifier channels to a power-saving SLEEP mode. The power amplifier has an output power of 4 × 200 watts into 2 - 8 ohms or 2 × 400 watts into 4 -16 ohms in bridge mode.

LEDs for standby/power, sleep, signal, limit, protect and bridge mode as well as gain controls per channel are located on the front. For remote control, the amplifiers are equipped with a switch contact for ON/OFF and channel-separated VCA inputs for external volume control. All outputs can be controlled independently or in groups. Our WP-V and RP-V volume controls or the DV module for control via up/down contacts are provided for this purpose. A fault in the power amplifier channels is output via the potential-free fault contact.

Highlights

  •             Multi-channel power amplifier with 8×8 DSP matrix
  •             4 × 200 watts / 2 × 400 watts output power at 2 to 8 ohms
  •             8 × Line In, 4 × Speaker Out + 6 × Line Out
  •             Second slot for additional input module
  •             Interfaces: USB, Ethernet
  •             VCA inputs per channel
  •             Auto On/Off switchable per channel
  •             On/Off contact and fault contact
  •             Switchable input sensitivity +4/-6 dBU per channel
  •             Infinitely variable quiet fans
  •             Ground lift switchable per input channel pair
  •             Housing 1 U, installation depth only 348 mm
  •             Options:
  •             - 8×IN-SYM input module 8 × Line In balanced
  •             - 8×IN-CINCH input module 8 × Line In unbalanced
  •             - DANTE 8×8 8-channel Dante input module
  •             - 100 V transformer
  •             - Volume control (Wall Panel WP-V or Rack Panel RP-V)
  •             - DV module for volume control via up/down contacts

Specifications

Verstärkertyp Multiroom Verstärker
Output power RMS 200 W
Gewicht netto 0 kg
Gewicht brutto 0 kg
Colour and design
Color Schwarz
Konnektivität
Anschlüsse und Übertragungsstandard
  • Klemmen
  • RJ45/LAN
  • Stereo Cinch (RCA)
Anzahl Kanäle Ausgang 4
Impedance 4-8 Ohm
Multikanal Yes
Produktdimensionen
Breite 483 mm
Höhe 44 mm
Tiefe 348 mm

Downloads

LB_PA_DSC_Bedienungsanleitung.pdf (1.7 MB)

Download

lb_Flyer_PA-SERIES_0.pdf (2.2 MB)

Download

LB Datenblatt PA 4200_2023.pdf (1.5 MB)

Download

Consisting of

Accessories

Are you sure about this?